Tee shirt printing has been vastly popular since pop culture references and other types of media has influenced it. There are so many inexpensive ways in achieving this, and it is to each their own techniques. But what is special to this is that any person, provided with the right materials and knowledge, can do this themselves.
There are a few things you need to get before doing this. A lot of custom screen printing services in Fort Worth TX have certain materials also that they use to generate shirt designs that their customers want from them. Although you can do the same in a small scale if you want to try it out.
This is done by first coating the screens in photo emulsion then seemingly cut an image out from it by using bright light. What you need are necessary materials to be able to do this, and with careful and attention to detail, this would be done well. Just make sure you have everything set up and ready.
The materials you need are just a few. You need screens with a frame, and then a photo emulsion which comes with a sensitizer, for lighting you need a bulb for an evenly spread exposure which should be fifty watts, and lastly a pair of gloves. Also, the room you are using must be pitch black.
Of course, you would need a plain shirt, a squeegee which can be bought for fourteen dollars, silk screen fabric ink which can be more or less five dollars, and then a small piece of cardboard or smooth thin piece of wood. This one is used for the inside of the shirt. This is during the printing process.
To prepare the design of the screens, you need to first setup the frame and screens and make sure they are tightly placed. Then you add and splay over the photo emulsion which should be mixed in with the sensitizer. Use the squeegee to evenly spread it. Make sure that the covered area is twice the size of the design to leave room for it.
After fully spreading it you have to leave it on a pitch dark room for about two hours or more until it dries. Go into the room but make sure it is not exposed to any light just yet. Print out the design you have in a clear sheet and then using masking tapes, tape it over the screen. This is what makes it cut out the design on the layer of emulsion.
Turn on the lamp and let it be exposed to the light for fifteen minutes. See if it already looks good after peeking through the faint cut outs, if not, let it stay for a bit longer. Overexposure can let the image bleed that is why you need to be careful.
Clean the screens off with running water until the dried emulsion on the design or the cut out parts are completely gone. Let it dry and lay it over the shirt with the cardboard inside it. Apply the ink over it and spread it using a squeegee over different directions, making sure it is evenly spread. Carefully take it out and let it dry.
There are a few things you need to get before doing this. A lot of custom screen printing services in Fort Worth TX have certain materials also that they use to generate shirt designs that their customers want from them. Although you can do the same in a small scale if you want to try it out.
This is done by first coating the screens in photo emulsion then seemingly cut an image out from it by using bright light. What you need are necessary materials to be able to do this, and with careful and attention to detail, this would be done well. Just make sure you have everything set up and ready.
The materials you need are just a few. You need screens with a frame, and then a photo emulsion which comes with a sensitizer, for lighting you need a bulb for an evenly spread exposure which should be fifty watts, and lastly a pair of gloves. Also, the room you are using must be pitch black.
Of course, you would need a plain shirt, a squeegee which can be bought for fourteen dollars, silk screen fabric ink which can be more or less five dollars, and then a small piece of cardboard or smooth thin piece of wood. This one is used for the inside of the shirt. This is during the printing process.
To prepare the design of the screens, you need to first setup the frame and screens and make sure they are tightly placed. Then you add and splay over the photo emulsion which should be mixed in with the sensitizer. Use the squeegee to evenly spread it. Make sure that the covered area is twice the size of the design to leave room for it.
After fully spreading it you have to leave it on a pitch dark room for about two hours or more until it dries. Go into the room but make sure it is not exposed to any light just yet. Print out the design you have in a clear sheet and then using masking tapes, tape it over the screen. This is what makes it cut out the design on the layer of emulsion.
Turn on the lamp and let it be exposed to the light for fifteen minutes. See if it already looks good after peeking through the faint cut outs, if not, let it stay for a bit longer. Overexposure can let the image bleed that is why you need to be careful.
Clean the screens off with running water until the dried emulsion on the design or the cut out parts are completely gone. Let it dry and lay it over the shirt with the cardboard inside it. Apply the ink over it and spread it using a squeegee over different directions, making sure it is evenly spread. Carefully take it out and let it dry.
About the Author:
You can visit igniteimaging.com for more helpful information about Homemade Process From Custom Screen Printing Services.
No comments:
Post a Comment